How to adjust the concentration and dosage of aluminum sulfate-Zibo Boshan Win-Win Chemical Co., Ltd.

NEWS

Home page

release time:

2022-03-11 10:41

Aluminum sulfate is often added to water as a coagulant for sewage treatment, but sometimes its use effect is different. There are many influencing factors, mainly including the quality of water quality itself, stirring factors, and dosage. These will affect the subsequent water purification effect, and different concentrations will also affect the use effect. Let's take a detailed look at how to adjust the concentration and dosage during use.
The content is generally in the range of 15.6%, and the liquid product can be in the range of 6%-8%. In actual operation, general liquid products will be added directly, and then the dosage will be controlled according to the water quality and water quality. However, when the amount of water is small or the amount of medicament to be added is small, it is also necessary to add water to dilute it before using it.
The solids need to be dissolved in water with a concentration of 10% before use, and then adjusted according to the concentration of water pollutants. The concentration of aluminum sulfate in the range of 5%-30% can be used normally. Under normal circumstances, the same If the concentration of the agent is higher, then the dosage needs to be less, and the solution in the same size and volume container can be used for a longer time. It is not recommended to adjust it too frequently. The actual concentration and dosage can be adjusted according to the actual conditions of water quality and quantity. When the amount of water decreases or increases, the concentration or dosage of the chemical should also be adjusted accordingly.
The above describes how to adjust the concentration of aluminum sulfate and how to adjust the dosage. When we use it, we need to pay attention to the fact that the more the dosage is, the better. positive effect.

How to adjust the concentration and dosage of aluminum sulfate

2022

The production process of aluminum sulfate

Aluminum sulfate has a very good application in papermaking, water purification and other aspects. In the production, many used bauxite for production, but it is easy to cause the consumption of raw materials and the quality of the produced products. It will also be affected to a certain extent. Among various methods, only using kaolin as raw material for production is cost-effective, and the production process is relatively stable, and the quality of the produced products is relatively good.

2022

Aluminium sulfate improves soil salinization

There is a lot of land in my country that cannot be planted with crops, because the alkalization and salinization of these soils are serious, and crops cannot grow. Aluminum sulfate can be used to improve the salinization of the soil. The improvement effect of soda saline-alkali soil is very significant. The following Let's learn more about it.

2022

Inspection process of aluminum sulfate

Aluminum sulfate needs to be inspected when it leaves the factory. Only qualified products can be used in the factory. What is the inspection process of the product? Let's learn about it next, but this process is only used for the inspection of the product when it leaves the factory. Other situations need to be checked against other standards.

2022

Chemical Properties of Aluminum Sulfate

Aluminum sulfate is widely used in industry. It can be used as a sizing agent in papermaking, as a flocculant and sewage purifier in water treatment, and many other uses, which are related to its own chemical properties. It is related. Its chemical properties make it widely used in many fields. The following editor will introduce its chemical properties.

2022

Influence of low temperature on liquid aluminum sulfate

With the arrival of winter, the temperature is getting lower and lower, and it has begun to be lower than 10 degrees Celsius, so the editor thought, in such cold weather, will the use of aluminum sulfate also have an impact, and in this I think the impact of low temperature on liquid products should be relatively large, let's take a look.

2022

Low temperature will affect the effect of aluminum sulfate coagulation

We have mentioned many times in previous articles that aluminum sulfate can play a coagulation effect in water treatment. If the water temperature is so low, can coagulation still achieve the original effect? Let's find out whether low temperature will affect the coagulation effect.

"Because of specificity, so professional", the designated supplier of the world's top 500 companies Specializing in the production of industrial aluminum sulfate, iron-free aluminum sulfate, high-purity aluminum sulfate and battery grade aluminum sulfate

Manager Yang (domestic business):

186-5334-0892

shuangying0892@163.com

SI SI (import and export business):

0533-4200240

sisi@winwinchemicals.com

Manager Yang (domestic business):

Houyu Industrial Park, Xiajiazhuang Town, Boshan District, Zibo City, Shandong Province

Zibo Boshan Win-Win Chemical Co., Ltd. was established in 2002, It is a manufacturer specializing in the production and export of industrial aluminum sulfate, iron-free aluminum sulfate, high-purity aluminum sulfate, flame retardant aluminum sulfate, lithium battery grade aluminum sulfate, ferrous sulfate, aluminum hydroxide and other chemicals.

+86-533-4200240

Contact information：+86186-0731-6212

Address: Houyu Industrial Park, Xiajiazhuang Town, Boshan District, Zibo City, Shandong Province

Domestic business：Manager Yang +8618653340892

Domestic business：+86-533-4200240

京ICP备10002622号-38

国际站建设：中企动力淄博 | 外贸google推广 | SEO

+86-533-4200240

Contact information：+86186-0731-6212

Address: Houyu Industrial Park, Xiajiazhuang Town, Boshan District, Zibo City, Shandong Province

Domestic business：Manager Yang +8618653340892

Domestic business：+86-533-4200240

京ICP备10002622号-38

Poweredby:www.300.cn SEO